当前位置:网站首页 > 技术文章 > 不同切削条件下,双相不锈钢转变过程中的微硬度和表面完整性

技术文章

不同切削条件下,双相不锈钢转变过程中的微硬度和表面完整性

发布时间:2015-09-14   点击次数:329次

The objective of the investigation was to identify microhardness of surface integrity (SI) after turning with wedges of coated sintered carbide. SI is important in determining corrosion resistance, and also in fatigue crack initiation. The investigation included microhardness analyses in dry and wet machining of duplex stainless steel. The microhardness of SI for various cutting speeds was compared. It has been shown that wet cutting leads to the decrease of SI hardening depth, while increasing the rounded cutting edge radius of the wedge increases the maximum microhardness values and the hardening depth. An infinite focus measurement machine has been used for the rounded cutting edge radius analysis. The study has been performed within a production facility during the production of electric motor parts and deep-well pumps as well as explosively cladded sheets.


上一篇 : 德国LAUDA Scientific 光学接触角测量仪的测量性能    下一篇 :  刀具的几何和磨损测量

分享到:

返回列表

北京东方德菲仪器有限公司主营产品:在线接触角测量仪,德国接触角测量仪,进口接触角测量仪,国产接触角测量仪,接触角张力测量仪
版权所有 地址:海淀区紫竹院路69号兵器大厦1010室 网站地图
备件销售电话 Tel:010-68920257/75/76/77 传真 Fax:010-68729983 邮编:100089 电子邮箱 E-mail:mary_wang@edcc.com.cn
京ICP备05028011号-2 返回首页 管理登陆 技术支持:化工仪器网

联系人
在线客服
用心服务成就你我